May 29, 2012
May 8, 2012
Body and paint work.
Well shop class is over. Back from the body shop. Now we start putting it all back together.
Fury at the body shop.
The fury is almost finished. It is at the body shop for final body repairs and painting.
Here is a video of the car before it was sent to the body shop.March 10, 2012
March 2012 - Paint Removal!!!
Let the paint removal begin! We have sanded, ground and wire brushed with side grinders! All paint is almost gone. This is a lot of work. Most paint on all surfaces is removed. Just detail removal remains.
February 11, 2012
Engine Start up! February 10, 2012
Well we got the Fury started! It took a while to get the carb and timing right. It still needs a little (lot) fine tuning. It back-fired a lot during the first few tries and it blew out both mufflers :( So we still don't have a good idea how it will sound when they are replaced. We had fun getting it going. Much thanks to my neighbor Jim and half brother Bill for helping to get it dialed in.
January 28, 2012
Engine is in !! January 27, 2012
We got the engine in! After much pushing and shoving it is in the car. Now lots of detail stuff to get it running: -Connect and repair wiring harness -Install radiator and related hosing -Remove and flush the old gas tank -Connect transmission linkages -Lots of other details...
January 13, 2012
January 13, 2012
The engine is coming together nicely! Crank and pistons were put in last week (January 6, 2012). Today we put on the heads, cam, valve train and front cover.
December 24, 2011
December 2011
I've been working on the car a little this month while the class is on break.
I've started the interior. The carpet is in, back seat is in. Repaired the heater controls. Installed wiring for the rear speakers, amp and sub-woofer.
I've started the interior. The carpet is in, back seat is in. Repaired the heater controls. Installed wiring for the rear speakers, amp and sub-woofer.
Front seat is in! It's starting to look like a real car.
The engine is back from the machine shop. It looks great, can't wait to start putting it together with the class in January.
Also rebuilt the transmission. I took some pictures of it when I had it all apart, but I had the camera settings wrong and the pics were all blurry. So all I have are pics of it back together. You'll just have to trust that all the time I spent in the garage Friday was rebuilding the transmission.
November 25, 2011
November 25, 2011
The car is resting (my wallet is resting too) for a while.
All 6 windows work now, even though the drivers door is still not on the car. This was quiet an accomplishment since none of the window parts are made anymore. I was fortunate enough the find what I needed in junk yards.
I'm waiting to put the carpet and interior together until the dust from the body work is finished are close to being finished.
The engine is still at the machine shop waiting its turn to be worked over by Nelson.
The front suspension is all together. The hardest thing to find for the front was the lower ball joints. I was able to find some on ebay from a seller that did not have them listed, but just happened to have a pair laying around!
November 18, 2011
November 11, 2011
Today Kyle and Steven took a nap in the trunk!
Jacob and Paul “fixed” some holes in the floor.
Despite all this hard work the guys did get the rear brakes back together. And the front brakes and suspension are underway!
October 21, 2011
Last week and this week we worked on the brakes and suspension. Everything is worn out! All suspension parts and brake parts are shot! This car was a road hazard when it was last on the road, which was about 2 years ago.
Kyle is cleaning parts.
IB and Steven are beating the car into submission!
Paul is getting the rear brakes together.
October 6, 2011
Well, I said I wasn’t going to hot rod the engine… But… I guess I was wrong. So let the hot rodding begin! We got a Holley 4 barrel carburetor and an Edelbrock intake and a performance cam.
September 30, 2011 & October 1, 2011
We have the engine disassembled and ready too take to a machine shop. Don’t know which one???
Jacob and I went junk yard’n Saturday October 1, 2011. We visited Steve Ivester’s yard in Lawndale, NC. He’s been collecting Mopar cars and parts for 30 years. He knows his stuff. He took us to the “new” field, where there were only about 6 cars. We went to work on a ’66 Sport Fury and came out with a bumper, right fender and rear window regulator parts. So it was another sucsesful day of junk yard’n!
September 23, 2011
We started to disassemble the engine this week. Much thanks to my neighbor, Jim, for explaining the engine 4 strokes with his cut-away view engine. It was very helpful and the boys learned a lot.
I’ve learned that the engine we removed from the car is 1974 318, the donor engine I have is a 1968 318. We need a donor engine because the ’74 has a cracked block. So we will end up with an engine from ’74 and ’68 going into a ’66.
September 21, 2011
I had the afternoon off. So I reassemble the passenger door and got it back on the car! Yeah! This is exciting because now 3 out of 6 windows operate! And the passenger door can be opened from the inside or outside, another great improvement.
September 16, 2011
Second day of Shop Class. The guys worked really hard! We were able to get the engine pull out. It took a little pushing and shoving, but it came on out.
Subscribe to:
Posts (Atom)











